1000 Litre Dosing Tank

1000 Litre Dosing Tank manufactured in food grade Natural coloured MDPE

1000 Litre Dosing Tank DT1000 Introduction

The DT1000 is a dosing tank with a capacity of 1000 litres, designed specifically for use in water treatment, effluent treatment or process applications, with dimensions of 1065 Ø x 1350 H (mm).

The 1000 Litre Dosing Tank is manufactured from food grade and U.V stabilised MDPE (Medium Density PolyEthylene), which is rotatory moulded in the UK, to give a single piece construction chemical dosing tank.

The DT1000 provides a simple and cost effective way of storing up 1000 litres of chemical which can then be transferred into a process using a Dosing Pump or other equipment, as required.

The 1000 Litre Dosing Tank has a graduated scale on the front of the tank which is colour contrasted on our natural coloured tanks.  This allows the user to visually inspect the contents of the tank at a glance.

The 1000 litre Dosing Tank is available in a range of colours, including: black for use with liquids with a low vapour pressure, such as Sodium Hypochlorite or Hydrogen Peroxide, as well as Red or Blue to denote if the contents are acidic or alkaline in nature, U.V Stabilised Natural MDPE, or Green.

Screw Top Lid

The DT1000 Dosing Tank is moulded as a single piece construction, with the threaded section moulded at the point of manufacture. This means that our 1000 Litre Dosing Tank has no seams or welds.  The single piece construction increases the mechanical strength of the dosing tank and as there are no weak points in the tanks construction, it reduces the risk of the tank becoming compromised during normal operation.

As the thread is integral to the construction of the tank, there are no screws holding the threaded section into place, which ensures a completely corrosion free storage environment.

Supplied complete with the tank is a large black screw fitting lid with dimensions of 270mm Ø, to keep the contents of the 1000 Litre Dosing Tank securely locked away, when not in use. The aperture of the tank opening is 195mm Ø.

DT1000 Equipment Mounting

The DT1000 is manufactured with a raised flat shelf which is designed so that equipment can be mounted on top of the tank.

Due to the robust construction of the tank and flat top, we are able to offer the DT1000 fitted with monitoring sensors from our range including Industrial Mixers, dip pH, Redox, or Conductivity assemblies as well as Liquid Level Sensor Assemblies, to allow the automated switching of control equipment.

Where more than one item is mounted on to the tank, or where the equipment is heavy, we're able to fit a tank top strengthening plate model, to the dosing tanks.

Modifications

As the 1000 Litre Dosing Tank can be used as a 1000 litre process vessel, we can supply the DT1000 complete with fittings or with other modifications, to suit your application.

We can fit solenoid valves; actuated valves (manually, pneumatically or electrically actuated), as well as inlets, outlets and other general pipework and fittings, depending upon your requirement.

Bund Tank for DT1000

The DT1000 can be supplied complete with an associated bund tank to ensure compliance with Health & Safety legislation and to provide containment in the event of the tank becoming compromised.

The companion bund for the DT1000 Dosing Tank is the BT1000 Bund Tank, which allows the tank to be stood in the bund tank and for the top of the tank to be easily accessible. The BT1000 has a total capacity of < 1100 Litres.

1000 Litre Dosing Tank Features & Benefits

The 1000 Litre Dosing Tank model DT1000 is manufactured in the UK using moulding techniques to give single piece construction, with no welds or seams, ensuring greater mechanical strength.

The MDPE is U.V. stabilised, ensuring no discolouration to the tank, even when stored outside.  The MDPE is available in natural with colour contrasted graduation scales, allowing the operator to easily view the liquid level.

Chemically resistant MDPE is compatible with a wide range of chemical reagents and is also supplied to food grade standards.  Please don't hesitate to get in touch, if you wish to check the complicity of your reagents with MDPE.

We can supply our 1000 Litre Chemical Dosing Tank in black for use with chemicals that have a low vapour pressure such as sodium hypochlorite or hydrogen peroxide and with a companion bund.

For easy recognition of the tank contents, we can supply our DT1000 coloured in either Natural, Black, Blue, Red, or Green, as required.

Our single piece construction includes the thread for the screw top lid.  This means that there are no fixings used in the construction of the tank, ensuring that it is both corrosion free and mechanically strong.  The screw top lid can be fixed to the tank tightly, containing the chemical inside.

We can supply the DT1000 Chemical Dosing Tank with modifications for process applications, completely unmodified with the companion BT1000 bund, or as a stand alone 1000 litre chemical dosing tank.