240 VAC High Speed Mixer with 4" Propeller

TM1-SP2-EVA High Speed Industrial Mixer fitted with a 4 inch Ø marine style propeller with a 0.37kW 240 Volt single phase motor and with a PVC coating for greater chemical resistance.

TM1-SP2 High Speed Mixer Introduction

The TM1-SP2 is a high speed industrial mixer, designed for mixing and blending applications in process control, water treatment or effluent treatment applications, such as pH correction and powder mixing, where a 3 phase supply is not available.

Fitted with a 4 inch or 100mm marine style propeller, the TM1-SP2 creates a vortex within a liquid solution, forcing the powders or liquids to mix. The TM1-SP2 operates at 1400 RPM and is powered from a 0.37kW 3 phase 240 VAC motor.

The direct drive mixer is suitable for mounting into vessels with a 500 Litre capacity, such as our 500 Litre dosing tank or other similar vessels.

High Speed Mixer with 4 inch Propeller

The TM1-SP2 utilises a 4 inch propeller which forces the liquid into a vortex to provide continual mixing of liquids or powders.  The marine style propeller has a 3 petal arrangement and a tip continuous diameter of 4 inches, manufactured in 316 stainless steel.

The 4 inch propeller is held in place with a shaft and coupling arrangement, also manufactured in 316 stainless steel.  The shaft is available custom manufactured to length.

Our 4 inch propeller is designed to optimise the mixing capability by maximising the motor efficiency. The effective mixing of the propeller is greater per horse power when compared with flat disc type mixers and other styles of propeller.

High Speed Mixer TM1-SP2 with 0.37kW 3 Phase Mixer

The standard TM1-SP2 is fitted with TEFC (Totally Enclosed Fan Cooled) direct drive motor and manufactured to IP55 specifications.  The standard motor is a 240 V three phase motor.  We also offer a 380 Volt motor, flame proof motor and on the TM1 model we offer a 415 VAC three phase motor.

Chemically Resistant High Speed Mixer TM1-SP2

For use with process chemicals, we offer the TM1-SP2 with the wetted parts (shaft and 4 inch propellor) coated in PVC.  This makes the mixer suitable for mixing applications where the process chemical reacts with 316 stainless steel.

The shaft and mixer are coated as a single piece.  This ensures that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer that the materials being used are compatible with PVC. 

TM1-SP2 High Speed Mixer Features & Benefits

The TM1-SP2 is a high speed mixer, designed for light to medium industrial duties where a 3 phase supply is not available.  Manufactured in house at our Stafford facility, the TM1-SP2 is available with a number of customisations, depending upon the duty required.  These include a 415 VAC single phase motor, 3 phase 380 VAC motor, flame proof motor, or with chemically resistant coating.  Please get in touch if you require any specific customisations for use with your process.

The 4 inch propeller offers efficient mixing and is designed for vessels approximately 200 Litres in capacity.  For vessels with variable liquid levels, the TM1-SP2 can be integrated with our Liquid Level Control devices to prevent operation where a low liquid level is present.

As a direct drive high speed mixer with totally enclosed fan cooled motor, the TM1-SP2 is designed for continuous operation with minimal preventive maintenance to offer efficient mixing of water treatment, effluent treatment, and process control applications where a 3 phase supply is not present.