Dip Conductivity Cell with Cell Constant K=0.1

The Dip Conductivity Cell D2-01 is designed for continuous measurement of electrolytic conductivity within tanks, sumps, pits, lagoons and other vessels.

Dip Conductivity Cell D2-01 Introduction

The D2-01 dip conductivity cell is designed to measure the conductivity values of solutions within vented tanks, process vessels, tanks, sumps and pits.

The D2-01 comprises of a robust conductivity cell manufactured in cPVC, epoxy resin and carbon electrodes which are mounted into a uPVC riser tube for location into a tank or pit.

The Dip conductivity cell can be mounted into a tank using a pair of clips or alternatively the D2-01 can be mounted using an optional mounting flange to ensure that the conductivity cell is held into place.

In addition to measuring the conductivity, the D2-01 can be fitted with an optional temperature sensor for measuring temperature and providing automatic temperature compensation to a compatible instrument.

The D2-01 dip conductivity sensor assembly is supplied as standard measuring 600mm in length.  Where required, we can manufacture to custom lengths.  Please advise when ordering.

The D2-01 is suitable for use in temperatures up to 50ºC.

The D2-01 has a cell constant of K=0.1 which is designed to measure conductiviy ranges up to a value of 0 - 2.0mS (2000µS)

The D2-01 conductivity cell has a detachable connector fitted to the cell head for easy servicing and calibration as standard.  We also offer fitted cell heads for laboratory or portable instruments, as required.

When fitted with a removable head connector. this has easily accessable connections for a two wire device for conductivity only, or for a 4 wire device for conductivity with temperature compensation.

We strongly recommend pairing a 2 wire device with our specifically shielded conductivity connecting cable, model LMK2, and with the 4 wire device, with our conductivity connecting cable with ATC model LMK4.

D2-01 Automatic Temperature Compensation

The dip conductivty cell D2-01 is available with automatic temperature compensation to suit a number of different conductivity controllers or conductivity transmitters. Please specify when ordering the name and manufacture of the conductivity instrument so we can ensure compatibility with the automatic temperature compensation.

D2-01 Dip Conductivity Cell Features & Benefits

The D2-01 is supplied as a complete unit made to any length from 300mm to 2000mm; ready for simple and permanent installation into a process vessel either clipped into place or alternatively request our optional mounting flange.

Easy to use with minimal maintenance required the D2-01 is suitable for conductivity applications with lower conductivity values (less than 2000µS), and with the automatic temperature compensation. Fluctuations in temperature are accurately compensated for, using a compatible instrument.

The D2-01 is often found in purity control for electroplating rinses and in recirculating cooling water control.

As a reliable and accurate conductivity cell, the D2-01 is a often paired with our C7635 conductivity controller.