High Speed Mixer with 6" Propeller

TM3 High Speed Industrial Mixer fitted with a 6 inch Ø marine style propeller with a 0.75kW 415 Volt 3 Phase Motor.

TM3 High Speed Mixer Introduction

The TM3 is a high speed industrial mixer, designed for mixing and blending applications in process control, water treatment or effluent treatment applications, such as pH correction and powder mixing.

Fitted with a 6 inch or 175mm marine style propeller, the TM3 creates a vortex within a liquid solution, forcing the powders or liquids to mix.  The TM3 operates at 960 RPM and is powered from a 0.75kW 3 phase 415 V AC motor.

The direct drive mixer is suitable for mounting into vessels with an approximate capacity of 2000 litres such as our 2500 Litre Chemical Storage Tank or other similar vessels.

High Speed Mixer with 6 inch Propeller

The TM3 utilises a 6 inch propeller which forces the liquid into a vortex to provide continual mixing of liquids or powders.  The marine style propeller has a 3 petal arrangement and a tip continuous diameter of 6 inches and is manufactured in 316 stainless steel.

The 6 inch propeller is held in place with a shaft and coupling arrangement also manufactured in 316 stainless steel. The shaft is available custom manufactured to length.

Our 6 inch propellor is designed to optimise the mixing capability by maximising the motor efficiency.  The effective mixing of the propeller is greater per horse power when compared with flat disc type mixers and other styles of propeller.

High Speed Mixer TM3 with 0.75kW 3 Phase Mixer

The standard TM3 is fitted with TEFC (Totally Enclosed Fan Cooled) direct drive motor and manufactured to IP55 specifications.  The standard motor is a 415 V three phase motor. We also offer a 380 Volt motor, flame proof motor and we can offer a comparable air mixer for specific applications.

Chemically Resistant High Speed Mixer TM3

For use with process chemicals, we offer the TM3 with the wetted parts (shaft and 6 inch propeller) coated in PVC.  This makes the mixer suitable for mixing applications where the process chemical reacts with 316 stainless steel.

The shaft and mixer are coated as a single piece.  This ensures that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer that the materials being used are compatible with PVC. 

High Speed Mixer with Two Propellers TM3

With a large shaft diameter, the TM3 is suitable for use with tanks where the dimensions are non-standard such as chemical storage vessels or where the depth is proportionally larger than the width.

With some applications it can be beneficial to incorporate a second propeller to aid with the liquid vortex formation by helping in pushing the mixed liquids or powder and liquid mix into convergence.

When specifying a mixer with a second propeller, we will request additional information about the application to ensure the motor power rating is suitable for the application. This is because the addition of a second propeller to the mixer will offer a significant increase on the load.

TM3 High Speed Mixer Features & Benefits

The TM3 is a high speed mixer designed for continuous mixing in industrial environments.  Manufactured in house at our Stafford facility, the TM3 is available with a number of customisations, depending upon the duty required.  These include a second propeller, a 3 phase 380 VAC motor, flame proof motor, or with chemically resistant coating.  Please get in touch if you require any specific customisations for use with your process.

The 6 inch propeller offers efficient mixing and is designed for vessels approximately 2500 Litres in capacity.  For vessels with variable liquid levels, the TM3 can be integrated with our Liquid Level Control devices, to prevent operation where a low liquid level is present.

As a direct drive high speed mixer with totally enclosed fan cooled motor, the TM3 is designed for continuous operation with minimal preventive maintenance and to offer efficient mixing of water treatment, effluent treatment, and process control applications.