AML-9 Geared Mixer with an 8 inch Ø flat bladed PVC impeller and a PVC coated 316 stainless steel shaft, fitted with a single phase 240v 0.12kW AC motor and gearbox.

AML-9 Chemically Resistant Geared Mixer Introduction

The AML-9 is an industrial geared mixer with an 8 inch impeller, designed for use in chemical containers of up to approximately 300 litres in capacity, such as our DT300, for slow speed stirring and agitation.  The geared mixer is designed for agitation and stirring applications in process control, water treatment and effluent treatment, including the makeup of pH neutralisation and effluent treatment chemicals, such as a flocculent mixer or a polymer mixer.

AML-9 Chemically Resistant Geared Mixer Introduction

The AML-9 is a geared industrial mixer, designed to offer low cost chemical mixing and slow speed stirring in small dosing tanks, from a range of 100L to 300L capacity.

Unlike our GMW range of Industrial Geared Mixers, the AML-9 has an 8 inch or 200mm flat bladed dual style impeller, manufactured in 316 stainless steel and covered in PVC to offer greater chemical resistance.

Powered by a 0.12kW 230v single phase AC motor, the AML-9 delivers an output impeller speed of 200 RPM as standard and is also available with a higher ratio gearbox to offer an output of 70 RPM.  The model AML-9 is suitable for most light industrial slow speed stirring or agitation tasks, including keeping lime in suspension or continual agitation for pH neutralisation and other tasks.

AML-9 Geared PVC Mixer Installation

Unlike our other mixers the AML-9 has fixed shaft lengths and is only available with either a 600mm, 800mm, 900mm, or 1100mm long shaft.

The mixer should be mounted onto a mixer bridge, or tank strengthening plate.  Please consider any additional height these might add when considering the shaft length.

AML-9 Geared Mixer in PVC with 200mm Impeller

The AML-9 utilises a dual pronged flat bladed impeller with a 200mm diameter.  The impeller is designed to provide constant agitation of liquids and semi-viscous liquids.

AML-9 High Speed PVC Mixer with 0.12kW Single Phase Motor

The AML-9 is fitted with TEFC (Totally Enclosed Fan Cooled) direct drive motor and manufactured to IP55 specifications.  The standard motor is a 240 V single phase motor.  We also offer a 3 phase 415 VAC motor option for this mixer.

AML-9 Geared PVC Mixer Features & Benefits

The AML-9 is a geared mixer designed for light industrial duties where the volume of liquid to be mixed or kept under agitation is under 400 Litres.  Designed to offer cost effective entry level mixing, the AML-9 is available with a shaft length of either 600mm, 800mm, 900mm or 1100mm fixed lengths, with a single phase 240VAC motor or a three phase 415VAC motor.

The impeller is manufactured from PVC to improve the chemical resistance of the mixer and provides for adequate mixing in smaller vessels.

As a direct drive high speed mixer with totally enclosed fan cooled motor, the AML-9 is designed for continuous operation with minimal preventive maintenance to offer efficient mixing of water treatment, effluent treatment, and process control applications.

GMW0-SP2 Geared Mixer with a 6 inch Ø flat bladed impeller, fitted with a 3 phase 240V 0.18kW AC motor and worm gearbox.

GMW0-SP2 Geared Mixer Introduction

The GMW0-SP2 is an industrial geared mixer with a 6 inch impeller, designed for slow speed stirring and agitation.  The geared mixer is designed for agitation and stirring applications in process control, water treatment and effluent treatment.  The GMW0-SP2 operates well under conditions required for the makeup of pH neutralisation and effluent treatment chemicals, such as a flocculent mixer or polymer mixer.  It is also a suitable mixer for keeping lime in suspension for pH correction applications.

The GMW0-SP2 is the smallest of our geared mixers and fitted as standard with a 3 phase 240V 0.18kW AC motor, driving a reduction ratio worm gearbox with a 6 inch / 250mm impeller.

The standard impeller has a low shear co-efficient and is driven with a speed of 140RPM, making it ideal for use on smaller dosing tanks up to approximately 300 litre dosing tanks when used with low viscosity liquids.

GMW0-SP2 Geared Mixer with 6 inch Impeller

The GMW0-SP2 utilises a 6 inch impeller which is used to create a continuous stirring motion within the tank or vessel.  This ensures that the solution is under constant agitation from the industrial stirrer; improving the contact time and reaction potential when used for the agitation of reagent; mixing polymers or the make-up of effluent treatment chemicals.

The 6 inch impeller is not tapered to ensure the industrial stirrer generates a large contact area, thus providing both a better contact area for more efficient stirring and reduces the shearing coefficient when used as a flocculant mixer.

GMW0-SP2 Worm Gearbox Mixer

The 6 inch propeller is directly driven to the worm gear box.  The shaft is machined at our production facility in the Stafford, UK.  The shaft is held securely in place within the worm gearbox itself without a coupling.  This enables us to offer a wide variety of reduction ratios including 70 RPM, 95 RPM and 140 RPM.

In addition to offering a number of gearbox ratio options we machine the shafts and impellers in-house, allowing the shaft length to be manufactured to specification.

Our 3 blade flat 6 inch impeller is designed to optimise the stirring capability of the mixer for a number of different applications.  Therefore, the GMW0-SP2 is suitable for use as a geared mixer for viscous solutions as well as for flocculent or polymer makeup.

GMW0-SP2 Geared Mixer with 0.18kW 3 Phase Motor

The standard GMW0-SP2 is fitted with a TEFC (Totally Enclosed Fan Cooled)  motor and manufactured to IP55 specifications.  The standard motor is a 240 V three phase 0.18kW AC.  We also offer a 380 Volt motor, flame proof motor and 240 VAC Single phase motor.

GMW0-SP2 Chemically Resistant Geared Mixer

For use with process chemicals, we offer the GMW0-SP2 with the wetted parts (shaft and 250mm impeller) coated in PVC.  This makes the mixer suitable for mixing applications where the process chemical reacts with 316 stainless steel.

The shaft and 6" impeller are coated as a single piece which ensures that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer, that the materials being used are compatible with PVC. 

GMW0-SP2 Geared Mixer Features & Benefits

The GMW0-SP2 is a geared mixer, suitable for a wide variety of applications and unlike our High speed Industrial Mixers it doesn't have to be contained with a tank where the height of the liquid covers the impeller.

Designed for light and medium industrial duties the GMW0-SP2 has been used as an industrial stirrer for keeping lime solutions in suspension as well as a geared mixer for flocculant make up, pH neutralisation or other process control applications.

Manufactured in house at our Stafford facility, the GMW0-SP2 is available with a number of customisation options, depending upon the duty required.  We have fitted the geared mixer with a Food Grade lubricant, 240 VAC single phase motor, 3 phase 380 VAC motor, flame proof motor, or with chemically resistant coating.

The GMW0-SP2 is not suitable for fitting with a secondary impeller, instead we would suggest the GMW1 or GMW11 for consideration, but if you require or are considering any other specific customisation for use with your process, please get in touch.

The 6 inch impeller offers efficient mixing and is designed for smaller vessels.  The GMW0-SP2 can be used as a geared mixer for viscous solutions and if you're unsure on the precise mixer to suit your application, please don't hesitate to get in touch.

The slow speed geared mixer GMW0-SP2 is of proven design and construction, requiring minimal preventative maintenance for efficient low shear mixing.  Suitable for a wide range of applications including mixing water treatment chemicals and for mixing in process applications.

GMW1 Geared Mixer with a 10 inch Ø flat bladed impeller fitted with a 3 phase 415V 0.25kW AC motor and worm gearbox.

GMW1 Geared Mixer Introduction

The GMW1 is an industrial geared mixer with a 10 inch impeller, designed for slow speed stirring and agitation.  The geared mixer is designed for agitation and stirring applications in process control, water treatment and effluent treatment, including the makeup of pH neutralisation and effluent treatment chemicals, such as a flocculent mixer or polymer mixer, as well as a mixer for keeping lime in suspension for pH correction applications.

The GMW1 is fitted as standard with a 3 phase 415V 0.25kW AC motor.  We do offer single phase versions of the GMW-1 including the GMW1-SP2 fitted with a 240 V single phase 0.25kV AC motor and the GMW1-SP1 which is fitted with a 110 V single phase 0.25kV AC motor. Each of the single phase versions drive a reduction ratio worm gearbox to run the 250mm impeller (10 inch impeller).

The standard impeller has a low shear co-efficient and is driven with a speed of 140RPM, with other output speeds available, making it ideal for use on a range of dosing tanks depending upon the duty, liquid type and viscosity.

Geared Mixer with 10 inch Impeller

The GMW1 utilises a 10 inch impeller which is used to create a continuous stirring motion within the tank or vessel. This ensures that the solution is under constant agitation from the industrial stirrer making it ideal for keeping lime solutions in suspension as well as other slow speed stirrer applications, such as improving the contact time and reaction potential when used for the agitation of reagent, mixing polymers or the make-up of effluent treatment chemicals.

The 10 inch impeller is not tapered to ensure the industrial stirrer generates a large contact area, providing both a better contact area for more efficient stirring and reduced shearing coefficient when used as a flocculant mixer.

GMW1 Worm Gearbox Mixer 

The 10 inch propellor is directly driven to the worm gearbox.  The shaft is machined at our production facility in the Stafford, UK to ensure that it is held securely in place within the worm gearbox itself, without a coupling.  This enables us to offer a wide variety of reduction ratios including 70 RPM, 95RPM and 140 RPM.

In addition to offering a number of gearbox ratio options we machine the shafts and impellers in house, allowing the shaft length to be manufactured to specification.

Our 3 blade flat 10 inch impeller is designed to optimise the stirring capability of the mixer for a number of different applications.  This makes the GMW1 suitable for use as a geared mixer for viscous solutions as well as a geared mixer for flocculent or polymer makeup.

Geared Mixer GMW1 with 0.25kW 3 Phase Motor

The standard GMW1 is fitted with a TEFC (Totally Enclosed Fan Cooled)  motor and manufactured to IP55 specifications.  The standard motor is a 415 V three phase 0.25kW AC motor.  We also offer a 380 Volt motor, flame proof motor, 110 VAC single phase motor or 240 VAC Single phase motor.

GMW1 Chemically Resistant Geared Mixer

For use with process chemicals, we offer the GMW1 with the wetted parts (shaft and 250mm impeller) coated in PVC.  This makes the mixer suitable for mixing applications where the chemical to be coated reacts with 316 stainless steel.

The shaft and 10" impeller are coated as a single piece which ensures that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer that the materials being used are compatible with PVC. 

GMW1 Geared Mixer Features & Benefits

The GMW1 is a geared mixer, suitable for a wide variety of applications and unlike our High Speed Industrial Mixers, it doesn't have to be contained with a tank where the height of the liquid covers the impeller.

Designed for light and medium industrial duties, the GMW1 has been used as an industrial stirrer for keeping lime solutions in suspension as well as a geared mixer for flocculant make-up and as a geared mixer for pH neutralisation or other process control applications.

Manufactured in house at our Stafford facility, the GMW1 is available with a number of customisation options, depending upon the duty required.  As well as the 110 VAC and 240 VAC SP1 and SP2 versions, we offer the GMW1 with variations such as an additional impeller, Food Grade lubricant, 3 phase 380 VAC motor, flame proof motor, or with chemically resistant coating.

The GMW1 can be fitted with a second impeller although for heavier duties we would suggest considering the GMW11. I f you are considering a specific customisation for use with your process, or if you're unsure then please get in touch.

The 10 inch impeller offers efficient mixing and is designed for smaller vessels.  It is suitable for use on viscous solutions depending upon the solution viscosity and volume. If you're unsure on the precise mixer to suit your application please don't hesitate to get in touch.

The slow speed geared mixer GMW1 is of proven design and construction requiring minimal prevent ive maintenance for efficient low shear mixing.  Suitable for a wide range of applications including mixing water treatment chemicals and for mixing in process applications.

GMW1-SP2 Geared Mixer with a 10 inch Ø flat bladed impeller fitted with a single phase 240v 0.25kW AC motor and worm gearbox.

GMW1-SP2 Geared Mixer Introduction

The GMW1-SP2 is an industrial geared mixer with a 10 inch impeller, designed for slow speed stirring and agitation.  The geared mixer is designed for agitation and stirring applications in process control, water treatment and effluent treatment where a 3 phase supply is not present.

The GMW1-SP2 is ideal for the makeup of pH neutralisation and effluent treatment chemicals such as a flocculent mixer or polymer mixer, as well as a mixer for keeping lime in suspension for pH correction applications.

The GMW1-SP2 is fitted as standard with a single phase 240v 0.25kW AC motor.  We do offer a three phase 415V three phase versions of the GMW1-SP2 which is the GMW1 fitted with a 415v three phase 0.25kV AC motor and we also offer a 110 volt single phase version with 0.25kW motor the GMW1-SP1.

All of the GMW1 slow speed stirrers utilise a reduction ratio worm gearbox to drive a 250mm impeller (10 inch impeller).

The standard impeller has a low shear co-efficient and is driven with a speed of 140RPM, with other output speeds available, making it ideal for use on a range of Dosing Tanks, depending upon the duty, liquid type and viscosity.

Geared Mixer with 10 inch Impeller

The GMW1-SP2 utilises a 10 inch impeller which is used to create a continuous stirring motion within the tank or vessel.  This ensures that the solution is under constant agitation from the industrial stirrer making it ideal for keeping lime solutions in suspension as well as other slow speed stirrer applications, such as improving the contact time and reaction potential when used for the agitation of reagent, mixing polymers or the make-up of effluent treatment chemicals.

The 10 inch impeller is not tapered to ensure the industrial stirrer generates a large contact area to provide both a better contact area for more efficient stirring and reduced shearing coefficient when used as a flocculant mixer.

GMW1-SP2 Worm Gearbox Mixer

The 10 inch propellor is directly driven to the worm gearbox.  The shaft is machined at our production facility in the Stafford, UK to ensure that it is held securely in place within the worm gearbox itself without a couplin.  This enables us to offer a wide variety of reduction ratios including 70 RPM, 95RPM and 140 RPM.

In addition to offering a number of gearbox ratio options we machine the shafts and impellers in-house allowing the shaft length to be manufactured to specification.

Our 3 blade flat 10 inch impeller is designed to optimise the stirring capability of the mixer for a number of different applications, making the GMW1-SP2 suitable for use as a geared mixer for viscous solutions as well as a geared mixer for flocculent or polymer makeup.

Geared Mixer GMW1-SP2 with 0.25kW 240v Single Phase Motor

The standard GMW1-SP2 is fitted with a TEFC (Totally Enclosed Fan Cooled)  motor and manufactured to IP55 specifications.  The GMW1-SP2 uses a single phase 240v 0.25kW AC motor.  Flameproof motors and hygienic motor types are available for hazardous or food & dairy applications as well as a 110VAC single phase version Model GMW1-SP1.

GMW1-SP2 Chemically Resistant Geared Mixer 

For use with process chemicals, we offer the GMW1-SP2 with the wetted parts (shaft and 250mm impeller) coated in PVC.  This makes the mixer suitable for mixing applications where the chemical to be coated reacts with 316 stainless steel.

The shaft and 10" impeller are coated as a single piece to ensure that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer that the materials being used are compatible with PVC. 

GMW1-SP2 Geared Mixer Features & Benefits

The GMW1-SP2 is a geared mixer, suitable for a wide variety of applications and unlike our High Speed Industrial Mixers, it doesn't have to be contained within a tank where the height of the liquid covers the impeller.

Designed for light and medium industrial duties where a three phase supply isn't present, the GMW1-SP2 has been used as an industrial stirrer for keeping lime solutions in suspension.  Other uses are as a geared mixer for flocculant make-up as well as a geared mixer for pH neutralisation or other process control applications.

Manufactured in house at our Stafford facility, the GMW1-SP2 is available with a number of customised options, depending upon the duty required.  These include adding an additional impeller, food grade lubricant, 3 phase 380 VAC motor, flame proof motor, or with a chemically resistant coating.

The GMW1-SP2 can be fitted with a second impeller although for heavier duties we would suggest considering the GMW11-SP2 as a geared mixer for use with a single phase 240 VAC supply.  If you are considering a specific customisation for use with your process, or if you're unsure, then please get in touch.

The 10 inch impeller offers efficient mixing and is available PVC coated, for greater chemical resistance.  Designed principally for smaller vessels, it is suitable for use on viscous solutions, depending upon the solution viscosity and volume.  If you're unsure on the precise mixer to suit your application, please don't hesitate to get in touch.

The slow speed geared mixer GMW1-SP2 is of proven design and construction, requiring minimal preventive maintenance for efficient low shear mixing.  The Design offers slow speed agitation for numerous applications including mixing water treatment chemicals and for mixing in process applications where a three phase supply isn't present.